Home / Science
Sodium Vapour Lamp
By:dasan
Sodium Vapour Lamp consists of a discharge tube made from a heat resistant glass, containing a small amount of metallic sodium, neon gas and two electrodes, Neon gas is added to start the discharge and to develop enough heat to vaporize the sodium. Because of law pressure inside the tube, a sufficiently long tube required to obtain more light. To reduce the overall dimension of the lamp, this tube is generally bent into U-shape.
The light produced by this lamp is yellowish which is produced at its optimum pressure of about 0.004mm of mercury. This pressure is obtained at a temperature of about 280° C and so it becomes necessary to maintain this temperature. For this purpose the U-tube is enclosed in a double walled flask to prevent lose of heat. The double walled flask is interchangeable and can be fitted on to another U-tube. While replacing the inner U-tube one must be very careful because if it is broken and sodium comes in contact with moisture, it may result in fire.
All electric discharge lamps require a higher voltage at the time of starting and low voltage during operation. Generally, sodium vapour lamps are operated by a high leakage reactance transformer. At starting a high voltage of about 450 volts is applied across the lamp which is sufficient to start the discharge. When the lamp is fully operative after 10 - 15 minutes, the voltage across it falls to about 150 volts. Because of the high reactance of circuit, the power factor is low and hence a p.f improvement capacitor is connected.
The efficiency of a low pressure sodium vapour lamp is very high (about 40 - 50 lumens/watt) and it produces a light of particular wavelength having yellow color. Sodium lamps are mainly employed for street, high way and airfield lighting where color distinction is not so necessary.
Sodium Vapour Lamp consists of a discharge tube made from a heat resistant glass, containing a small amount of metallic sodium, neon gas and two electrodes, Neon gas is added to start the discharge and to develop enough heat to vaporize the sodium. Because of law pressure inside the tube, a sufficiently long tube required to obtain more light. To reduce the overall dimension of the lamp, this tube is generally bent into U-shape.
The light produced by this lamp is yellowish which is produced at its optimum pressure of about 0.004mm of mercury. This pressure is obtained at a temperature of about 280° C and so it becomes necessary to maintain this temperature. For this purpose the U-tube is enclosed in a double walled flask to prevent lose of heat. The double walled flask is interchangeable and can be fitted on to another U-tube. While replacing the inner U-tube one must be very careful because if it is broken and sodium comes in contact with moisture, it may result in fire.
All electric discharge lamps require a higher voltage at the time of starting and low voltage during operation. Generally, sodium vapour lamps are operated by a high leakage reactance transformer. At starting a high voltage of about 450 volts is applied across the lamp which is sufficient to start the discharge. When the lamp is fully operative after 10 - 15 minutes, the voltage across it falls to about 150 volts. Because of the high reactance of circuit, the power factor is low and hence a p.f improvement capacitor is connected.
The efficiency of a low pressure sodium vapour lamp is very high (about 40 - 50 lumens/watt) and it produces a light of particular wavelength having yellow color. Sodium lamps are mainly employed for street, high way and airfield lighting where color distinction is not so necessary.
Article Source: http://www.redsofts.com/articles/
Dasan writes about Distance Education, Science Articles and Business Hosting topics. This article is free to re-print as long as nothing is changed, all links remained intacked, the bio remains in full and the rel="nofollow" tag is not added to any of the links. Thank-you
More Articles from Science Category:
Up, Up and Away! Look Forward to Space Travel by 2008
Learning About Snake Facts And Behaviors
Biodiesel and You
Beating the High Price of Gasoline with Biodiesel
Making Biodiesel For Fun and Savings
Making Biodiesel at Home
The Biology 30 Curriculum
Capacitor: An Overview
How to Make a Thermometer
A History of Elasticity
Pump It Up!
Prototypes, The Granddaddy Of All Products
Magnets Are a Very Important Part of Our Lives
Many Uses of Metal Detectors
How the Meter Came To Be
|
|
|
